Best Victron Battery Monitor Setup | 6 Victron Battery Monitors

Victron Battery Monitor

The Victron battery monitor is a battery observing gadget that works with Bluetooth. It generally serves as a battery measure that permits clients to screen their battery bank’s presentation by involving an external screen or checking the voltage in a current second battery.

Time-to-go It is programmable, has inbuilt transfer, and triggers outer gadgets under surrounding conditions and elements with a programmable alert.

Table Of Contents

List of Victory Battery Monitors

1. Lynx Smart BMS

Battery Management System:

The Lynx Smart BMS is a committed Battery Management System for Victron Lithium Savvy Batteries. It has a pleasant and unpleasant busbar and a BMS, a contractor, and a battery display.

  • It is essential for the Lynx Distribution framework.
  • A Lynx Smart BMS has a monitoring LED, and a Bluetooth LED.
  • The Lynx Smart BMS can be transmitted through Bluetooth with the Victron Connect application. This can be conveyed using VE.

Victron Battery Monitor can Connect app

The Lynx Smart BMS and up to 4 associated Lynx Distributors can be observed and arranged with the Victron Connect application.

GX Device – Victron Battery Monitor

The Lynx Smart BMS and up to 4 associated Lynx Distributors can be observed with a GX gadget. The GX gadget can be associated with the VRM entryway considering remote check.

Lithium-ion Smart Batteries

The Lynx Smart BMS is a committed BMS for the Victron Energy scope of Lithium Smart batteries. Lithium iron phosphate (LiFePO4) batteries are accessible in 12.8V or 25.6V and an assortment of limits.

They can be associated in series, equal, or series/equal, so a battery bank for framework voltages of 12V, 24V, or 48V can be made. Up to four 12.8V batteries or two 25.6V batteries can be connected in series.

Up to 5 batteries or battery series strings can be associated equally.

The Lynx Distribution System

The Lynx Distribution System consists of the following parts:

Lynx Power In: A positive and negative busbar with four batteries or DC hardware associations.

Lynx Distributor-A positive and negative busbar with four intertwined associations for batteries or DC gear along with intertwined observing

Lynx Shunt VE.Can-A positive busbar with a space for a primary framework meld and a negative busbar with a shunt for battery observing. It has VE.

Can correspondence be With a GX gadget, you can check With a GX gadget, check With a GX gadget, and check and arrange with a GX gadget.

Lynx Smart BMS-For use along with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contractor driven by a battery in the executive’s framework (BMS) and a negative busbar with a shunt for battery checking.

In addition, it has Bluetooth correspondence for observing and arranging through the Victron Connect App, and VE.can correspond for observing with a GX gadget and the VRM entry.

2. Lynx Shunt VE.Can

Busbar integrated battery monitoring

  • The Lynx Shunt VE. It can contain a positive and negative busbar, a battery screen, and a wire holder for the primary framework combined. It is important for the Lynx Distribution framework.
  • The Lynx Distributor has a power LED.
  • The Lynx Shunt VE. It can be conveyed using VE. Can with a GX gadget.
  • The Lynx Shunt VE.Can ship with two RJ45 VE. Can eliminators. These are utilized when interfacing with a GX gadget.
  • The Lynx Shunt VE. Can is intended to hold a CNN intertwine. The circuit should be bought independently.

The Lynx Distribution System

The Lynx Distribution System is a particular busbar framework that consolidates DC battery associations, dissemination, combining, battery checking, or potentially Lithium battery the executives.

The Lynx Distribution System consists of the following parts:

Lynx Power In-A positive and negative busbar with four associations for batteries or DC hardware.

Lynx Distributor: A positive and negative busbar with four melded associations for batteries or DC gear along with intertwined observing.

Lynx Shunt VE.Can-A positive busbar with a space for a fundamental framework meld and a Negative busbar with a shunt for battery observing. It has VE. Can correspondence for checking and arranging with a GX gadget.

Lynx Smart BMS-for is utilized along with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contractor driven by a battery, the executive’s A battery-checking framework (BMS), and a negative busbar with a shunt for battery checking.

It has Bluetooth correspondence for observing and arranging through the Victron Connect App.

Also VE. Can correspondence for observing with a GX gadget and the VRM gateway.

3. Victron Battery Monitor -700 series:

Precision Battery Monitoring Battery’ fuel check’, time-to-go marker, and significantly more.

The excess battery limit relies upon the ampere-hours consumed, release current, and temperature.

Furthermore, the age of the battery, Complex programming calculations are expected to consider this multitude of factors.

For fundamental presentation choices, for example, voltage, current, and ampere-hours consumed, the BMV-700 series.

It also displays the charge condition, time to go, and power utilization in Watts.

The BMV-702 elements have extra information which can be customized to quantify the voltage (of a second) battery, battery temperature, or midpoint voltage (see underneath).

Smart Bluetooth

Utilize the Bluetooth Smart Dongle to screen your batteries on Apple or Android cell phones, tablets, MacBooks, and different gadgets.

Victron Battery Monitor Easy to Install

All electrical connections are to the fast interface PCB on the flow shunt. The shunt is associated with the screen with a standard RJ12 phone link.

Included: RJ12 link (10 m) and battery link with meld (2 m); no different parts required.

Likewise, included is a different front bezel for a square or round show appearance, a getting ring for the back, mounting and screws for the front mounting.

Easy to Program (with your smartphone!)

A fast introduction menu and a definite arrangement menu with looking over texts help the client navigate the different settings.

On the other hand, pick the quick and simple arrangement: download the cell phone application (Bluetooth Smart dongle required)

Midpoint voltage monitoring (BMV-702 only)

This component, which is frequently utilized in industry to screen huge and costly battery banks, is presented for the first time made accessible for a minimal price to screen any battery bank.

A battery bank comprises a line of series associated cells. The midpoint voltage is the voltage midway along the string.

In a perfect world, the midpoint voltage would be 50% of the complete voltage by and large.

They are practically speaking. Nonetheless, deviations will be seen that rely upon factors like an alternate charge condition for new batteries or cells, various temperatures, inner spillage flows, limits, and significantly more.

The midpoint voltage’s huge or expanding deviation focuses on inappropriate battery care or a bombed battery or cell.

Following a midpoint voltage caution, remedial activity can forestall serious harm to a costly battery. Kindly counsel the Victron Battery Monitor manual for more data.

Standard Features

  • Battery voltage, current, power, ampere-hours consumed, and condition of charge
  • Remaining time at the current pace of release
  • Programmable visual and discernible caution
  • Programmable hand-off, to switch off non-basic burdens or to run a generator when required
  • 500 Amp fast interface shunt and association pack
  • Shunt determination ability up to 10,000 Amps
  • VE.Direct correspondence port
  • Stores a wide scope of verifiable occasions, which can be utilized to assess use examples and battery wellbeing
  • Wide information voltage range: 6.5 – 95V
  • High current estimation goal: 10 MA (0.01A)
  • Low current utilization: 2.9Ah each month (4mA) @12V and 2.2Ah each month (3mA) @ 24V

BMV-702 Additional Features

Extra contribution to gauge voltage of a subsequent battery, temperature, or midpoint voltage, and comparing alert can disseminate settings.

BMV-700H: 60 to 385 VDC voltage range

No extra parts are required. Note: appropriate for frameworks with grounded negative just (battery screen isn’t disengaged from shunt).

Other Battery Monitoring Options

Lynx Shunt VE.Can

More about midpoint voltage

One terrible cell or one awful battery can obliterate a huge, costly battery bank. An opportune caution can be produced whenever batteries are associated in series by estimating the midpoint voltage.

See the BMV manual, segment 5.2, for more data if it’s not too much trouble. We suggest our Battery Balancer (BMS012201000) boosts the administration life of series-associated batteries.

4. BMV-712 Smart: Bluetooth inside

The BMV Smart is prepared for the Internet of Things (IoT) time with Bluetooth worked in. With Bluetooth being carried out in most other Victron Energy items, remote correspondence between items will improve framework establishment and improve execution.

Download the Victron Bluetooth application

Utilize a cell phone or other Bluetooth empowered gadget to: Redo settings, Screen immensely significant information on a single screen, View chronicled information, and Update the product when new highlights become accessible.

Victron Battery Monitor 71 Easy to Install

All electrical associations are to the fast interface PCB on the flow shunt. In addition, the shunt is associated with the screen with a standard RJ12 phone link. Included: RJ12 link (10 m) and battery link with combine (2 m); no different parts required.

Additionally, a different front bezel is included for a square or round show appearance, a getting ring for back mounting, and screws for front mounting.

Midpoint Voltage Monitoring

One awful cell or battery can obliterate a huge, costly battery bank. An ideal warning can be created by estimating the midpoint voltage whenever batteries are associated in series. For more data, see the BMV manual, area 5.2, if it’s not too much trouble.

We suggest our Battery Balancer (BMS012201000) boosts the administration life of series associated lead-corrosive batteries.

Very low current draw from the Battery

Current utilization: 0.7Ah each month (1mA) @12V and 0.6Ah each month (0.8mA) @ 24V Particularly Li-particle batteries have no limit left when released until low voltage closure.

After closure because of low cell voltage, the limit hold of a Li-particle battery is around 1Ah per 100Ah battery limit. Therefore, the battery will be harmed if the leftover limit hold is drawn from the battery.

A lingering current of 10mA, for instance, might harm a 200Ah battery if the framework is left in a released state for over eight days.

Bi-Stable Alarm Relay

Forestalls expanded the current attract instance of an alert.

Other features of Victron Battery Monitors

  • Battery voltage, current, power, ampere-hours consumed, and condition of charge
  • Remaining time at the current pace of release
  • Programmable visual and discernible alert
  • Programmable transfer, to switch off non-basic burdens or to run a generator when required
  • 500 Amp speedy associate shunt and association pack
  • Shunt choice capacity up to 10,000 Amps
  • VE.Direct correspondence port
  • Stores a wide scope of recorded occasions, which can be utilized to assess utilization examples and battery wellbeing.
  • Wide information voltage range: 6.5 – 70V
  • High current estimation goal: 10 MA (0.01A)
  • Extra contribution to quantifying voltage (of a subsequent battery), temperature or midpoint voltage, and Relating alert and transfer settings

5. SmartShunt 500A/1000A/2000A

The SmartShunt is an across-the-board battery screen, just without a showcase. Instead, your telephone goes about as the showcase.

The SmartShunt associates through Bluetooth to the VictronConnect App on your telephone (or tablet) furthermore, you can advantageously peruse out checked battery boundaries, similar to the condition of charge, time to go, authentic data, and substantially more.

Then again, the SmartShunt can be associated and be perused by a GX gadget. Association with the SmartShunt is made through a VE. Direct link.

The SmartShunt is a decent option for a BMV battery screen, particularly for frameworks where battery observing is required; however, less wiring and mess is needed.

The SmartShunt is outfitted with Bluetooth, a VE. Direct port and an association that can be used to screen a subsequent battery, for midpoint observing, or to interface a temperature sensor.

Types of BMV712 Battery Monitor

  • No programmable visual and discernible caution.
  • No programmable transfer

6. Victron Battery Monitor

The issue: the help life of a costly battery bank can be significantly abbreviated because of the condition of charge unbalance.

One battery with a somewhat higher inward spillage current in a 48V or 24V bank of a few series/equal associated batteries will cause undercharge of that battery and equal associated batteries and cheat of the series associated batteries. Also, when new cells

or then again batteries are associated in series, they should all have a similar introductory charge condition. Little contrasts will be resolved during retention or level charging.

However, enormous contrasts will harm the batteries because of unnecessary gassing (brought about by cheating) of the

batteries with the higher starting condition of charge and sulfate (brought about by undercharging) of the batteries with the more subordinate beginning condition charge.

The Solution: Battery Balancing

The Battery Balancer levels the charge of two series associated 12V batteries or a few equal series of series associated batteries.

Whenever the charge voltage of a 24V battery framework increments to more than 27, 3V, the Battery Balancer will on and look at the voltage

over the two series associated batteries. The Battery Balancer will draw a current of top to 0,7A from the battery (or equal associated batteries) with the most noteworthy voltage.

The subsequent command present differential will guarantee that all batteries will meet a similar charge condition. If necessary, a few balancers can resemble.

LED Indicators

Green: on (battery voltage > 27,3V)

Orange: lower battery leg dynamic (deviation > 0,1V)

Orange: upper battery leg dynamic (deviation > 0,1V)

Red: alert (deviation > 0,2V). Stays on until the deviation has diminished to under 0,14V, or until framework voltage drops excessively under 26,6V.

Alarm Relay

Typically, open. The caution hand-off closes when the red LED turns on and opens it after you see the red LED turns off.

Alarm Reset

Two terminals are accessible to interface a press button. Interconnecting the two terminals resets the transfer.

The reset condition will stay dynamic until the alert is finished. From there on, the transfer will close again when another caution happens.

Much more knowledge and control with the midpoint observing capacity of the BMV-702 Battery Monitor

The BMV-702 calculates the middle of a series of cells or batteries. It shows the departure from the best middle in volts or percent.

Separate deviation rates can be set to set off a visual/discernible alert and close a possible free hand-off contact for remote caution purposes.

If it’s not too much trouble, note the manual of the BMV-702 for further data about battery adjusting.

Battery Monitors and Monitoring Solutions

The BMV item range, extras, and related items

Victron Energy has an exhaustive scope of Battery Monitors, Battery Balancers, BMS, and Shunt choices, in addition to a wide assortment of board and framework checking arrangements (neighbourhood and remote), for example, the Victron GX item range, for instance.

There’s additionally a scope of reciprocal embellishments. However, among the numerous extras is a scope of Temperature Sensors, to name one item bunch.

Added to this is the free and ever well-known Victron Connect application, in addition to the VRM Portal (likewise free) – where gadget observing, item arrangement, firmware updates, and information can all meet up.

What is The beginning and the BMV Range?

In this blog, however, I need to cause you to notice where this incorporation began – the robust BMV range.

The BMV range consists of items with BMV-7 in the model’s name; prior variants had a six prefix. Underneath, I feature the distinctions between the different current models – so you should rest assured you pick the right one for your application and financial plan. The reach consists of:

  • BMV-712 Smart (6.5 – 95 V, 1 – 9999 Ah, Bluetooth worked in, Auxiliary information)

The models underneath, without Bluetooth, worked in, we buy and large allude to as the BMV-700 series:

  • BMV-702 (6.5 – 95 V, 1 – 9999 Ah, Auxiliary information)
  • BMV-702 [Black] (6.5 – 95 V, 1 – 9999 Ah, Auxiliary information)
  • BMV-700 (6.5 – 95 V, 1 – 9999 Ah)
  • BMV-700H (60 – 385 V, 1 – 9999 Ah)

This BMV (Battery Monitor Victron) range gathers high-accuracy battery screens. Their fundamental capacity is to work out ampere-hours consumed and the condition of charge of a battery.

Consider these screens your battery’ fuel check’, with an opportunity to-go marker and considerably more.

Each model accompanies a square bezel overlay (assuming you wish a square measure look instead of the cycle), a getting ring for back mounting, and screws for front mounting.

Any model can be mounted in a board of your decision with a 52 mm (2.0 inch) opening or in one of Victron’s discretionary tailor-made divider fenced-in areas.

A 500A/50mV shunt, fitted with a fast associate PCB is essential for each item bundle. Options shunts are accessible whenever required: 1000A-50mV, 2000A-50mV, 6000A-50mV.

All models accompany 10 m of 6 center UTP link with RJ12 connectors and a power supply link total with meld.

The BMV range is all compatible with VE. Smart Networking.

Note that albeit the BMV-702, BMV-702 (Black), BMV-700, and BMV-700H don’t have Smart Technology worked in, they can be generally refreshed to utilize it with the discretionary VE.

Direct to Bluetooth Smart dongle. The main drawback is that it implies the VE. A direct correspondence port is currently being used for the dongle, so you can’t interface it to a Victron GX gadget.

If you need Victron Smart Technology and GX gadget network, purchase the BMV-712 Smart.

However, if you needn’t bother with the additional usefulness of the 712 Smart or are on a tight spending plan, then, at that point, pick one of the different models to suit your necessities.

These are only a portion of the frill and BMV related items vital to battery observing and the great support of your batteries.

For example, the GX GSM modem and the Smart Battery Sense can be found on the complete adornments page.

  • VE.Direct to Bluetooth Smart dongle (permits BMV-700 series models to utilize the VictonConnect application over Bluetooth, very much like the BMV-712 Smart does with its inherent Bluetooth)
  • Temperature Sensor (utilize the helper contribution of BMV-7*2 models to show the temperature on your BMV utilizing this embellishment)
  • Divider Enclosures (BMV or BMV + Color Control GX)
  • Shunts (1000, 2000, and 6000 A/50mV sizes, which are options in contrast to the standard 500A/50mV shunt provided with each BMV)
  • Battery Balancer (adjusts the condition of charge of two series associated 12V batteries, or of a few equal series of associated series batteries)
  • Victron GX item range permits extended battery observing choices, both nearby and remote, when utilized with a BMV (model GX gadget shown)
  • VE.Direct links (different lengths) to interface a BMV 7** to a Color Control GX
  • VE.Direct to USB interface (associates a few BMV 7** to a Color Control GX or a PC)
  • VE.Direct LoRa WAN – module (Connect your BMV straightforwardly to the VRM (Victron Remote Management] gateway)

Conclusion

Battery tests are the only way to determine the charge remaining in a battery. The tool used to perform this function is a battery tester.

I have provided detailed explanations of the features, capabilities, advantages, and disadvantages of the Victron Battery Monitor.

Because we know that the secret to preventing battery damage is to prevent misuse, and more importantly, to preserve battery capacity and not allow the battery to damage a healthy set of batteries.

A powerful battery monitor can detect a battery that is (hopefully) on the verge of death before it actually happens. One of the best ways to monitor batteries is to regularly measure the capacity of the power supply.

You May Also Like: Who Makes Super Start Batteries? Johnson Controls Batteries

Related Posts

Leave a Reply

Copyright © 2024 • Thunder Save • All Rights Reserved.